One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.                                    Phone: +86 15916928704  / E-MAIL: ym@syjwj.com.cn

Precision Auto Parts

How to prevent the damage of precision metal stamping parts

by:Fortuna     2021-05-04
How to prevent damage to metal stamping parts?
1) The models, specifications and functions of the hardware fittings selected should conform to the current national standards and relevant regulations, and match the selection of plastic steel doors and windows.
2) When installing hardware with fastening screws, a metal lining plate must be installed inside, and the thickness of the lining plate should be at least twice the pitch of the fasteners. It must not be fastened to plastic profiles, and non-metallic linings must not be used.
3) Pay attention to maintenance after installation of metal stamping parts to prevent rust and corrosion.
4) Hardware fittings should be installed last, door and window locks, handles, etc. should be assembled after the window and door leaves are in the frame to ensure accurate position and flexible switching.
5) For sliding windows with a width of more than 1 meter, or double-glazed doors and windows, it is advisable to install double pulleys or use movable elastic pulleys.
6) The sliding hinge shall not be made of aluminum alloy, but shall be made of stainless steel.
In daily use, lightly close and open lightly to prevent hard closing and hard opening, which may cause damage. Without noise, there is the current nylon wheel. Not only does it push and pull without noise, it is smoother, lighter, and has a service life that is not shorter than the above various pulleys. To make (doors) and windows normal. Smooth operation, you must give (doors) ) Choose a high-quality pulley for the window. On the surface, the inferior metal stamping pulley has rough workmanship, no smoothness, inflexible sliding, small and light.
Since its establishment, the company has taken technology research and development as the core advantage of the company. Starting from the original ordinary stamping parts, it is now able to manufacture precision stamping parts with a precision of 0.01MM. The stamping materials include stainless steel, non-ferrous metals, Ferrous metals and other metals and products are used in various industries such as automobiles, communications, electronics, electromechanical, construction, medical equipment, power equipment, precision instruments and household appliances. (Guide: Problems in the processing of metal stamping parts?)
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: