Jiangsu sheet metal stamping parts processing plant, mold development process + more than 20 mold development and design engineers

The mold research and development personnel of Jiangsu sheet metal stamping parts processing plant said that a set of standard stamping parts processing customization, from the beginning of the mold to the stamping of the product, must go through several complicated processes to complete. So what are the processes? The following Xiaoshuo sorted out some relevant knowledge, and let’s take a look with you: First, the design of engineering drawings. According to the structure and material thickness of the metal stamping parts, design the process to be done in each step of the mold, one by one. Designed as required. After the drawing design is completed, the next step is to prepare the materials, and then the thickness, size, cornering, and drilling of the template. After finishing these, the template can be sent out for heat treatment. After the heat treatment, it is the wire cutting process. Cutting holes, avoiding positions, inserts, punches, etc. After everything is ready, it’s time for the mold to be assembled. A bunch of accessories, springs, guide posts, screws, inserts, and punches are assembled to the mold one by one according to the drawings. After assembly, if it is too loose, it will be unqualified and need to be reworked. If it is too tight, it must be ground on the grinder to match it. After assembling these, enter the trial mold process of metal stamping parts. If the size is not in place, it needs to be repaired, and if the structure is not up to the requirements, it needs to be repaired or changed. If the metal stamping parts are defective, it must be repaired and changed. After completing these, basically a set of metal stamping die is completed. The next step is to install the machine and mass-produce it with quality and quantity. Hardware, 15 years of focus on sheet metal stamping parts processing plant in Jiangsu, 100+ sets of mold processing and assembly capabilities per month. There is quantity, accuracy, and efficiency. The next-day production capacity of 3 million punches, 16 strict quality inspections, and the stamping accuracy can reach 0.01mm, which can quickly solve the time emergency problem of stamping parts processing, solve the stamping accuracy problem, and solve the production quality problem for you. Choose, choose rest assured!