Principle and characteristics of four-column press for stamping parts processing equipment

There are many kinds of stamping parts processing equipment. What role does the four-column press play? Stamping parts processing manufacturers take you to take a look; stamping parts processing equipment four-column press is a stamping processing equipment that uses hydrostatic pressure to process metal, plastic, rubber, wood, powder and other products. It is often used in pressing processes and press forming processes, such as: forging, stamping, cold extrusion, straightening, bending, flanging, sheet deep drawing, powder metallurgy, pressing and so on. Four-column presses are used in electronics, instruments, instruments, hardware stamping industries, etc. It can cut, punch, blank, shape, riveting and other processes on thin plates, strips, and coils. It is suitable for non-ferrous metals, plastic parts, etc. Processing; the principle of the four-column press for stamping parts processing equipment; 1. There are many types of machinery that utilizes fluid pressure transmission made by Pascal's law. Of course, the uses are also diverse according to needs. For example, according to the type of liquid that transmits pressure, there are two categories: hydraulic press and hydraulic press. 2. Using the high pressure gas produced by the compressor, the compressed gas is delivered to the solenoid valve through the pipeline, and the action of the solenoid valve is controlled by the foot switch, thereby controlling the work and return of the cylinder, so as to achieve the purpose of punching; The compressed air in the press can be stored in the air tank and can be used at any time. Then it uses the working parts of the cylinder and the solenoid valve as the control element, which makes the four-column press equipment structure simpler, high safety performance, simple maintenance, and stamping The advantages of higher processing efficiency of parts; article recommendation: How to detect the quality of metal stamping parts, in which aspects? Previous post: How to detect the quality of metal stamping parts, in which aspects?