Production problems of precision terminal stamping parts

1. Reasons for the waste of precision terminal stamping parts: A: The quality of raw materials is not good; B: The installation and adjustment of the precision terminal die is improperly used; C: The operator does not feed the strip correctly along the positioning or does not guarantee the strip Feeding according to a certain gap; D: due to long-term use of the die, the gap has changed or its working parts and guide parts are worn; E: the die is affected by impact and vibration for too long, and the fastening parts are loosened, so that the installation positions of the die are relatively changed; F: The operator's negligence and failure to follow the operating procedures. 2. The main measures to prevent the waste of precision terminal stamping parts: A: The raw materials of the precision terminal must meet the specified technical conditions; B: All links specified in the process regulations should be fully and strictly followed; C: The pressure used Tooling equipment such as machines and dies should be ensured to work under normal working conditions; D: A strict inspection system has been established during the production process. The first pieces of precision terminal stampings must be thoroughly inspected. Only after the inspections can they be put into production, and then they must be regularly inspected. Inspect, strengthen inspections, and deal with accidents in time; E: Adhere to a civilized production system, such as the transfer of workpieces and blanks, must use corresponding equipment to avoid crushing and scratching the surface of the workpiece and affecting the precision terminals Surface quality; F: The mold cavity must be clean during the stamping process of precision terminals, and the orderly processed workpieces in the workplace must be placed neatly. Precise contact information: Precise wishes everyone a prosperous business and all the best. If you want to learn more, you can scan the following QR code and follow the official account. , Committed to the world's most professional precision stamping processing plant for electronic parts