Shield processing manufacturer, flatness of the same degree + 15 years of manufacturer and 0.07mm flatness control

Many of the shield manufacturers have encountered the problem of poor flatness of the shield. The false soldering phenomenon of the motherboard has affected the quality, efficiency, and various phenomena of customers. Xiaoshuo will analyze with you several reasons for poor flatness: 1. Reasons for mold making. The mold of the shielding cover did not meet the accuracy requirements during processing or assembly, which fundamentally caused problems. In later production, it is easy to cause undesirable phenomena. 2. The quality control of the production process is not in place. In the production of the shielding cover, if the raw materials are defective, it is easy to cause poor production. In addition, the mold will wear out during work. If it is not found in time, it will cause batch defects. 3. Packaging and transportation issues. Due to the unreasonable design of the tray or the unreasonable design of the carrier tape, it will be compressed and deformed after being laminated. Or in logistics and transportation, squeezing and bumping under the influence of external forces can also cause defects. Hardware, 15 years of focusing on shielding cover processing manufacturers, for the quality of the shielding cover, starting from the design of the mold, control every tiny movement and process, and the flatness is controlled within 0.07mm in the process. There are 16 quality inspections, and the quality is strictly checked. With a daily production capacity of 3 million strokes, every customer is satisfied with quality, service, and production capacity!