Automatic lathe parts process should pay attention to the safety rules
Professional automatic lathe processing, lathe processing is a part of mechanical processing, there are two main processing forms: one is fixed the lathe tool, unformed in rotary workpieces, another kind is fixed, the workpiece through the high speed cutting tool, precision machining.
Automatic lathe processing in the process of operation should pay attention to what issues?
In order to ensure operator safety automatic lathe processing, automatic lathe parts, inc. -
XiangDa hardware announced the automatic lathe processing safety operation rules, please consciously automatic lathe operator performance.
Automatic lathe processing safety operation rules: 1, the work are not allowed to drive the car in the way of braking of spindle.
2, looking for positive artifacts, only allowed with planks chuck or open the find is low speed, are not allowed to be open to find is at a high speed.
3, long tool installation shoulds not be stretched out and gasket to those points, width and bottom width.
4, loading and unloading chuck, shall turn the v-belt drive spindle by hand only back turned, absolutely forbidden to start the machine tool directly forced to loosen or tighten.
Want to on the bed mat board, at the same time to prevent an accident.
5, change the direction of spindle, to stop the spindle before, are not allowed to change suddenly turning direction.
Automatic lathe processing can also be used drill, reamer drill, reamer, tap, die, and knurling tools for the corresponding processing.
Lathe is mainly used for machining shaft, disk, and other rotary surface of the workpiece, is the most widely used in machinery manufacturing and repair factory of machine tool for processing.
A: all kinds of stamping parts wholesale headphone speakers basin net cover, metal headphone speakers