Continuous mold design considerations ( Below)

1. Multiplex step continuous mold, punching and cutting, cutting, bending, forming, cutting and other work order of arrangement of the step shall generally be the separation process, such as punching, incision, cutting groove arranged at the front, then can arrange bending, deep drawing process, and then arrange cutting and blanking process. 2. Blunt porous process in different shapes and sizes, as far as possible don't put the big hole and the hole at the same time step in the same industry, in order to repair the mold to make sure the pitch accuracy. 3. If forming and cutting on the same die, and the forming punch blanking punch should be fixed respectively, and don't fixed plate fixed on the same plane. Fixed in the forming punch as far as possible to take off the board, mounted behind the back. 4. At design time, you must see to it that each step has shaped part is not affected, keep the belt material in the same feed line. 5. Steps to process a lot and with more bending work step continuous mold, the edge of the die should be used as far as possible into the block structure, which can realize quick replacement and grinding. Continuous mold precision difficult: professional production suitable for riveting, tapping, secondary stamping, stacking and other complex processing and automation equipments type products. Mold production speed is 200 - 1500 SPM/minutes, the die life can reach more than 100 million times. Precision contact: wish you a prosperous business, everything goes well, if you want to learn more dynamic, can scan the qr code, pay attention to the public. , is committed to precision stamping processing factory of the world's most professional electronic components