Electronic hardware stamping parts, improve the stability of the continuous die stamping method [hardware]

Electronic hardware stamping parts, after evaluating the drawings, it is necessary to enter the link of mold making. There are several ways to improve production efficiency and stability. Xiaoshuo will learn with you: The workpieces of each process in the continuous mold are transferred by the excess material with the material, and the parts are generally completed in the blanking process. Separated from the tape. This edge is called the carrier of the continuous mold. In the continuous mold, the common carrier forms are: edge material carrier, intermediate carrier, double-sided carrier, unilateral carrier and other forms. The edge material carrier is used to punch a guide hole on the edge material of the workpiece to position it for forming processes such as drawing and bending. This kind of carrier is simple in design, reliable, and saves materials, so it has a wide range of applications. The intermediate carrier is along the strip material, cutting off most of the material around the workpiece, leaving only a small amount of connecting material in the middle of the strip width direction. This kind of carrier has poor rigidity and insufficient continuous stamping stability. The double-sided carrier is to leave less prying material on both sides of the strip. The carrier has good rigidity and is not easy to deform. It is often used for continuous stamping of thin-material and large-feed workpieces. The single-sided carrier only leaves a small amount of material on one side of the strip. This kind of carrier has poor rigidity and can only be used for continuous stamping of workpieces with large material thickness and small feed distance. Since continuous molds require high step accuracy, in order to ensure the dimensional accuracy of the step and improve the stability of the continuous mold work, the carrier cannot be deformed. Therefore, the design of the carrier is an important aspect of the continuous mold design. In order to ensure that the carrier has sufficient strength and rigidity, it is often necessary to appropriately increase the edge size; when the strength of the single-sided carrier is insufficient, the double-sided carrier and the intermediate carrier can be designed; the process incision is punched out between the carrier and the workpiece to make the carrier and the workpiece Separation, the deformation of the workpiece will not affect the deformation of the carrier and other measures. Hardware, 15 years of ingenuity focusing on electronic hardware stamping parts, 20,000+ sets of customized mold production experience, monthly processing capacity of 100+ sets of stamping dies, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!