Fenggang metal stamping parts processing plant, operating steps + 15 years, the manufacturer tells you what to pay attention to ()

Regarding some of the main operating steps of stamping processing, the production staff of Fenggang hardware stamping parts processing plant mentioned that Xiaoshuo compiled some relevant information, and I will share with you below: 1. All employees check before entering the work position Whether your clothing meets the job requirements. 2. Before machine work, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. Operation is strictly prohibited when the machine is faulty. 3. Turn off the power when changing the mold, and then start to install and debug the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand to test punch twice to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position. 4. It is necessary to wait for all other personnel to leave the working area of u200bu200bthe machine and remove the sundries on the workbench before starting the power supply to start the machine. 5. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or the foot switch board, let alone put their hands in the working area of u200bu200bthe machine or touch the moving parts of the machine with their hands. 6. When leaving get off work, turn off the power supply and arrange the finished products, side materials and sundries on the job to ensure a clean working environment. Hardware, 15 years of ingenuity and focus on metal stamping parts processing, 20,000+ sets of stamping die customized production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, silk-like stamping accuracy 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!