One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.                                    Phone: +86 15916928704  / E-MAIL: ym@syjwj.com.cn

Precision Auto Parts

Five specifications that must be observed in the processing operations of precision metal stamping parts

by:Fortuna     2021-04-15
The metal stamping products in the processing of precision metal stamping parts are not final consumer goods, but as auxiliary products of industrial manufacturing, and there are also some semi-finished products. Only a small part of precision metal stamping products are tool consumer products. Precision metal stamping parts are machine parts or components made of precision metal parts, or some precision metal stamping parts products, which can be used alone or as auxiliary tools. When processing precision metal stamping parts, the following five specifications must be observed to ensure safety and smooth production. When stamping the product, the operator must maintain the correct posture and have sufficient energy to cope with the work. If you find physical discomfort, for personal safety, you must leave the job immediately and report to the workshop supervisor or higher-level leadership. During operation, you must concentrate your thoughts, prohibit chatting, and cooperate with each other. The operator must not operate in a state of irritability and fatigue to avoid accidents and ensure safe operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Slippers, high heels and clothing that affect safety are not allowed, and those with long hair must wear a safety helmet. Before the machine works, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. Operation is strictly prohibited when the machine is faulty. When changing the mold, the power supply must be cut off first, and the punch motion department stops running before starting to install and debug the mold. After installation and adjustment, move the flywheel by hand to test punch twice. In order to avoid unnecessary collision between the machine and the product to be processed, the upper and lower molds must be checked for symmetry and reasonableness, whether the screws are firm, and whether the blank holder is reasonable Location. It is necessary to wait for all other personnel to leave the working area of u200bu200bthe machine and remove the debris on the workbench before starting the power supply to start the machine. When the machine is running, it is forbidden to reach into the working area of u200bu200bthe slider, and it is strictly forbidden to take it out by hand and punch. Standard tools must be used when picking and placing punches in the die. If you find any abnormal sound or malfunction of the machine, you should immediately turn off the power switch for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or pedal the foot switch board. For the safety of others, they cannot put their hands in the working area of u200bu200bthe machine or touch the moving parts of the machine with their hands. Hardware, a company with a development team of 20 people, a complete production process, and a company that quickly packs and ships the materials after they are OK, and a manufacturer of precision metal stamping parts with 15 years of experience. Your rest assured choice, hotline:
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: