Hengli metal stamping parts processing plant, what are the layout methods + know these points is a better choice ()

The technicians of Hengli metal stamping parts processing plant said that in general, the degree of utilization of precision stamping parts materials, precision stamping parts layout can be divided into three types: waste layout, less waste layout, and no waste. The following Xiaoshuo sorted out the information of these three layout methods, and take everyone to take a look: Scrap layout: Refers to the blanking of precision stamping parts other than the workpiece, including process waste and structural waste. All materials are punched out of the contour lines, and there are process residual materials between the workpiece and the workpiece, and between the workpiece and the strip. Because of the punching along the closed contour of the blanking part, the quality of the blanking part and die life will be higher. Low waste layout: The precision stamping parts are cut or punched along the contour line of the part of the workpiece, and there are only overlaps between the workpiece and the workpiece, and between the workpiece and the side of the strip. The blanking of this nesting method is only carried out along part of the contour of the workpiece, which is affected by the quality of the cutting strip and the positioning and errors. The quality of the cutting is slightly worse, but the material utilization rate can reach 70% to 90%. No waste layout: There is no overlap of precision stamping parts between the blanking part and the blanking part, and between the blanking part and the side of the strip. The blanking part is actually obtained directly by cutting the strip. The utilization rate can reach 85%-90%. However, this layout method will make the quality of the cut piece slightly worse. The three layout methods have their own advantages and disadvantages, so they should be selected according to the actual situation when designing the layout of precision stamping parts. Hardware, 15 years of focusing on Hengli metal stamping parts processing plant, hundreds of processing and production equipment, 20,000+ sets of customized stamping die production experience, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punches, and stamping accuracy up to 0.01 mm, 16 quality inspection layers are strictly controlled, focusing on quality and meticulous design. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!