How should the precision stamping die be maintained? 15 years of strength stamping manufacturer hardware tell you

Hardware is a powerful manufacturer with 15 years of experience in accumulating 50,000 sets of precision stamping dies. Regarding the maintenance of stamping bracket molds for metal stamping parts, Xiaoshuo has collected some relevant information for you, and let’s share with you: Maintenance 1. The punch is prone to breakage, bending and gnawing during the use of the mold, and the punch sleeve is generally gnawed. The damage of the punch and sleeve are generally replaced with parts of the same specification. The parameters of the punch mainly include the size of the working part, the size of the installation part, and the length dimension. 2. Springs and other elastic parts are easy to be damaged during use, and usually break and deform. The method adopted is to change. During the change, you must pay attention to the specification and model of the spring. The specification and model of the spring are confirmed by the color, outer diameter and length of the three items. Only when the three items are the same can be changed. 3. The cutting edge must be sharpened after long-term use, and the cutting edge surface must be demagnetized after grinding, and it cannot be magnetized, otherwise it is easy to cause blockage. 4. Pressing parts such as press plates, Uniglue, etc., unloading parts such as stripping plates, pneumatic ejectors, etc. During maintenance, check the relationship between the parts of each part and whether there is damage, repair the damaged part, check whether there is air leakage in the pneumatic jacking, and take measures for the specific situation. If the trachea is damaged, replace it. 5. Fastening parts, check whether the fastening parts are loose or damaged. The method adopted is to find the parts of the same specification for replacement. The above hardware author's introduction hopes that some of the common work stations mentioned in your search for hardware stamping parts manufacturers will be helpful, because some manufacturers say that they are used in the industry. If you need to know more about hardware stamping parts, please contact us.