Medical equipment precision stamping parts, understand these points to better control the process

Medical equipment precision stamping parts not only require relatively high material selection, but also have strict requirements on every detail in the production process. Compared with stamping factories, it is so important to control every production process and every production detail. 1. Regularly check the rotary table and mold mounting seat of the punch to ensure the coaxial accuracy of the upper and lower rotary tables. 2. The stamping parts of stretched medical equipment should be inspected strictly before installation and use, and the dirt should be cleaned up. Check carefully whether the guide sleeve and die of the drawing die are well lubricated. 3. In order to ensure the service life of the drawn parts, the mold springs should be replaced regularly to prevent spring fatigue damage and affect the use of stamping parts. 4. When installing the mold, when installing the mold, the stamping personnel should use soft metals (such as copper, aluminum, etc.) to make operating tools to prevent damage to the stamping parts when they are knocked or broken during the installation process. 5. When the punch and the edge of the drawing die are worn out in time, they should be sharpened in time. Otherwise, the degree of wear of the mold will rapidly expand, accelerate the wear of the mold, and reduce the quality of medical equipment stamping parts and the life of the mold. 6. According to the mold installation process, install the male and female molds on the turntable to ensure that the direction of the convex and concave stamping parts is the same, especially the medical device stamping parts (non-circular and SQ) with orientation requirements. UARE) Care should be taken to prevent wrong loading and reversing. Hardware, 15 years of ingenuity focused on medical equipment precision stamping parts, 20,000+ sets of customized mold production experience, 5000 square meters production workshop, stamping accuracy can reach ±0.01mm, 3 million punching next-day production capacity and 16 strict quality inspections. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose a rest assured!