Metal shell mould, design and manufacture of professional manufacturers
Metal shell mold in stamping process, by using the high speed punch, risk is higher.
In case of improper operation, the mould will cause serious damage, and operator safety will also be hurt, so the mold to machine, be sure to keep in mind the following operation, to ensure the safety of the mold and the operating personnel.
A, metal shell mould normal plane: 1.
The first punch hit 'inching, switch off the counter 2.
The punching machine to bottom dead center with inching switch (
, cut strip;
It is forbidden to die when you don't in the dead center will strip cut, easy cause deformation of strip and mould parts damage.
Screw loose up and down mould.
Beat punch to the top dead center, at the same time, the mold to the mold center position, when the die must be completed two people at the same time, not one person die to ensure the safety.
Die car must pull away from the punch a distance rear can reduce die car height.
To prevent car card in the punch mould platform, cause mould slide.
Clamping screws, scissors, hook, flashlight, etc in the mold die when it is strictly prohibited in punch operation platform.
Precision metal shrapnel stamping mould factory improve production ability, improve the efficiency of timely delivery, mould fast, continuous terminal shrapnel die first article 10 days to complete.
Stamping production speed, impact speed can reach more than 1500 times per minute.
Precision contact: wish you a prosperous business, everything goes well, if you want to learn more dynamic, can scan the qr code, pay attention to the public.
, is committed to precision stamping processing factory of the world's most professional electronic components