Metal Stamping Co., Ltd., the three major problems affecting the low efficiency of stamping processing

Metal Stamping Co., Ltd., in today's fast-developing market that is at the same time extremely stimulating in competition, not only needs to strengthen the improvement of technology, but also strengthen the improvement of research and development. It is also necessary to riveting enough strength in the management of stamping processing to increase production capacity and improve efficiency. In production, what are the important factors that affect efficiency? Xiaoshuo sorted out three points: 1. Unreasonable production scheduling. 　　Production scheduling has a great impact on the metal stamping factory. A reasonable production plan has a great effect on improving the efficiency of the stamping factory. There are many stamping production tasks, and there are big differences between different tasks. How to arrange the production plan reasonably so that the equipment vacancy rate in the workshop is lower, the product switching time is shorter, the employees are more familiar with the product, and the frequency of semi-finished products and waste products is reduced. Access and other issues. 2. The state of punch and stamping die is unstable. 　　 The structure of stamping products is complicated, and the complexity of punch and die is relatively high. Stamping workers are required to have a certain understanding of product complexity and do a good job in the quality control of the production process. It also requires technical work types to have a considerable degree of familiarity with the use and maintenance of punching presses and molds, so as to avoid problems. The downtime is reduced to a low level. Reduce the slow production and affect the construction period due to the poor state of the punch and mold. 3. Management confusion. In the production process of a metal stamping factory, the product volume is large and the production variety is large, and there are fewer means to automatically collect and record. Therefore, the statistics and collection of data are more difficult in the whole process; coupled with mixed-line production, The different standards after switching of different stamping parts result in different requirements for different types of production, so the management of employees is also more difficult; metal stamping companies often rely on experience, and management gradually accumulates experience, and Experience becomes the standard and can be promoted. Hardware, 15 years of ingenuity focus on hardware stamping Co., Ltd., 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality control . It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose, rest assured!