1, plywood and stamping die vice guide pin hole positioning hole circumference R1.
0 and polishing 2, box with oil stone or diamond knife bravely and remove burrs.
3, templates, two sides use the oil-stone bulldozed, remove the spring.
4, kerosene and alcohol will surface and inner hole clean.
5, assistant director suit with the template.
6, clamping part will punch into the template box, check whether the punch take put smooth.
7, to fix the punch with press.
Punch after fixed should have small space, to facilitate the punch guide is naturally.
8, will take off the board together with the back off gently into the plywood, check to take off the back of the plate must have without interference, completely and trendy, take off the backboard and plywood should be no gap between.
After 9, into the blanking punch should exceed the pressure of material surface.
10, in the adjustment lever and stamping die mold, rotating screw until rushed closer to the effective height adjustment.
Imported precision stamping die processing equipment, to perform mold maintenance regularly, to establish the corresponding spare parts inventory risk, ensure all kinds of precision shrapnel and the stability of the terminal stamping parts delivery.
Precision contact: wish you a prosperous business, everything goes well, if you want to learn more dynamic, can scan the qr code, pay attention to the public.
, is committed to precision stamping processing factory of the world's most professional electronic components