Ningbo lighting hardware stamping parts processing, processing method classification + stamping accuracy up to 0.01mm

The staff of Ningbo lamp hardware stamping parts processing said that according to different product processing methods, molds can be divided into five categories: punching and shearing molds, bending molds, drawing molds, forming molds and compression molds. Xiaoshuo collected the relevant content, and share it with you below: a. Punching and shearing die: The work is done by shearing. Common forms include shearing die, blanking die, punching die, trimming die, and edge die. , Punching die and punching die. b. Bending mold: It is a shape that bends the flat blank into an angle. Depending on the shape, accuracy and production volume of the part, there are many different forms of molds, such as ordinary bending dies, cam bending dies, curling Stamping dies, arc bending dies, bending punching dies and twisting dies, etc. c. Drawing mold: Drawing mold is to make flat blank into seamless container with bottom. d. Forming die: refers to the use of various local deformation methods to change the shape of the blank. Its forms include convex forming die, curling edge forming die, necking forming die, hole flange forming die, and round edge forming die. e. Compression die: It uses strong pressure to make the metal blank flow and deform into the required shape. The types include extrusion die, embossing die, embossing die, and end pressure die. Hardware, 15 years of ingenuity and focus on the processing of metal stamping parts, 20,000+ sets of stamping die customization production experience, monthly 100+ sets of die processing, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, and 16 strict quality inspections. check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!