A,.
Operation must be centred, it is strictly prohibited to gossip, cooperate with each other, the operator do not operate under state of irritability, fatigue, in order to avoid accidents, ensure the operation safety.
Moving parts, mechanical work before inspection is filling the oil, then start normal and check whether the clutch, brake, and 1 - machine idle running
3 minutes, mechanical failure operation is strictly prohibited.
Third, replacing mould first, turn the power off, press movement, after stop by to start the installation, debugging, mold.
Install has been completed, with the hand move the flywheel tried twice and check whether the upper and lower mould symmetry, reasonable, screw whether solid, whether to coil in an appropriate location.
Four, must leave machinery and other staff all the workspace, and take the worktable sundry, before starting power to start the machine.
After five, machine, by one person and mechanical operation, others may not push in turbine or stamped on the pedal switch board, more can't put hand in mechanical workspace or hand touches mechanical moving parts.
Mechanical work, banned reached into the slider workspace, it is strictly prohibited, leave work pieces by hand.
In the punching die, leave work pieces must use the standard tools.
If discover to there is abnormal sound or the machine mechanical failure, should immediately shut off the power switch.
Six, while going off work, should pass spare power supply, and tidy up the positions of the finished product, edge material and sundry etc, to ensure that the work environment clean and safe.
The above procedures must consciously abide by, don't violate compasses operation, failure, should cooperate with maintenance personnel maintenance, accident immediately cut off the power and keep the scene with factory department when hou, all the consequences resulting from the violation of operating procedures, shall be borne by the parties all consequences.
A: precision stamping processing main application is introduced
