Precision stamping die car will rise to the height of the corresponding mold in the mold frame, two people pull mold to mold the car at the same time.
Mold with mold frame distance is too large, mold plate surface below the rack mold mold base under too much mould pull easy to fall off.
Mould plate surface high die mold is not easy to pull to the car.
Mold with mold frame distance too close, mould wheel is easy to broken off the bottom mould inlet guide plate or plate material.
Precision stamping die mold should be located in the center of the car, it is forbidden to use tablet increase the incline of mold, to prevent mold from the mold.
Precision stamping die to die after the car, mould car pull away from the mould frame should be a distance will die after car height to a minimum, prevent bump broken, broken, scratches or other mould parts.
Precision stamping die in the process of pulling, prohibited personnel in the mold play in the car.
Pulling speed cannot too fast, prevent when the car is turning in the mold tooling car fell out of the mould and drop in inertial force, mold damage or injuries.
When pull the precision stamping die car should slow strength pull.
Instant tension will lead to die at the bottom of the car armrest or arm fixed screw fracture.
Precision contact: wish you a prosperous business, and treasures will be plentiful, if want to know more dynamic, can scan the qr code, pay attention to the public.
, is committed to precision stamping processing factory of the world's most professional electronic components