Shijie hardware stamping parts processing plant, peers are paying attention to this problem + increase production efficiency by 17%

Colleagues are discussing why the phenomenon of turning and distortion often occurs during stamping, which is also a point that customers are paying attention to. The production staff of the Shijie hardware stamping parts processing plant once said, what are the main reasons for turning over and twisting, the following Xiaoshuo collected some relevant information, let everyone take a look: In the progressive die, through punching The method of forming the outer shape of the stamping part by the excess material around the stamping part. The main reason for the turning and distortion of the punching parts is the influence of the punching force. During punching, due to the existence of the punching gap, the material is stretched on one side of the die (the material is warped upward) and compressed on the side of the male die. When using the unloading plate, use the unloading plate to compress the material to prevent the material on the die side from warping upwards. At this time, the force of the material changes accordingly. As the discharge plate increases its pressing force, the material on the punch side is stretched (compression force tends to decrease), while the material on the concave die surface is compressed (tension force tends to decrease). The overturning of the stamping part is caused by the stretching of the material on the die surface. Therefore, when punching, pressing and compressing the material is the most important thing to prevent the punch from turning over and twisting. Hardware, 15 years of focusing on Shijie hardware stamping parts processing plant, 20,000+ sets of customized stamping die production experience, monthly processing of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, silk-like stamping accuracy It can reach 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!