Stainless steel stamping parts processing, improve reliable quality + repeat every job [hardware]

The processing of stainless steel stamping parts is a product that we have more contact with in our work and production. How to improve production efficiency and product quality has always been the direction that people are constantly pursuing, and how to provide customers with higher-value stamping parts is a continuous step. 1. Chemical analysis and metallographic inspection analyzed the content of chemical elements in the material, measured the grain size and uniformity of the material, and evaluated the grades of free cementite, band structure and non-metallic inclusions in the material. The shrinkage and porosity of the material were examined. 2. Material inspection Stamping parts are mainly hot-rolled or cold-rolled (mainly cold-rolled) metal strips. The raw materials of metal stamping parts should have quality certificates to ensure that the materials meet the required technical requirements. When there is no quality certificate or other reasons, the manufacturer of metal stamping parts can select raw materials for re-inspection as needed. 3. Formability test Through bending test and cupping test, the work hardening index n and plastic strain ratio R of the material are determined. In addition, according to the formability and test method of the thin steel sheet, the test method of the steel sheet formability can be carried out. 4. Hardness test Rockwell hardness tester is used for the hardness test of metal stamping parts. Small stamping parts with complex shapes can be used to test the plane is very small, can not be tested on the ordinary bench Rockwell hardness tester. 5. Determination of other performance requirements The electromagnetic performance of the material and the bonding force of the coating and the coating were tested. Hardware, focusing on stainless steel stamping parts processing for 15 years, rich experience in custom processing and production of 20,000+ sets of molds, daily production capacity of 3 million strokes and 16 quality inspections strictly for quality control. It can quickly solve your time-critical problems, solve your product accuracy problems, and solve your stamping parts quality requirements. Choose, choose to rest assured!