Stainless steel stamping parts, the important role of molds in stamping processing [hardware]

Stainless steel stamping parts, stamping dies play an important role in production. Have you already understood some links and processes in the stamping process? Xiaoshuo takes you to take a look: 1. Simple die A simple die is a die that only completes one process in one stroke of the press. It is a simple die for blanking or punching. When the assembly drawing of the simple die is working, the strip is fed along the two guide plates on the die until it hits the positioning pin. When the punch is punched downward, the punched parts (or waste) enter the hole of the concave die, and the strip clamps the punch and moves upward along with the punch. When the strip hits the discharge plate (fixed on the die), it is pushed down, so that the strip continues to be fed between the guide plates. Repeat the above action to rush down the next part. 2. Continuous die A die that completes several stamping processes on different parts of the die at the same time in one stroke of the press is called a continuous die. When working, the positioning pin is aligned with the pre-punched positioning hole, the upper mold moves downward, the punch is blanked, and the punch is punched. When the upper die returns, the unloading plate pushes down the waste from the punch. At this time, the blank is fed forward, and the second blanking is performed. This cycle is carried out, and each feeding distance is controlled by the stopper pin. 3. Compound die In one stroke, a die that completes several stamping processes on the same part of the die at the same time is called a compound die. The characteristic of the compound mold is that there is a convex and concave mold in the mold. The outer circle of the convex and concave mold is the cutting edge of the blanking punch, and the inner hole becomes the drawing concave mold. When the slider moves downward with the convex and concave molds, the strips are first blanked in the convex and concave molds and the blanking concave mold. The blanking piece is resisted by the drawing punch in the lower die. When the sliding block continues to move downwards, the female die moves downwards for drawing. The ejector and the unloader push the drawn part out of the mold during the return stroke of the slider. The compound mold is suitable for stamping parts with large output and high precision. Hardware, 15 years of ingenuity focused on stainless steel stamping parts, 20,000+ sets of customized stamping die production experience, monthly processing capacity of 100+ sets of molds, 3 million punching times per day, stamping accuracy up to 0.01mm, and 16 quality inspections. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!