Stamping die design

In the industry of metal stamping parts, stamping, sometimes called sheet forming but slightly difference. Sheet forming refers to the use thin plate, thin wall pipe, profile as raw materials such as plastic processing and forming method of a general designation for the sheet metal forming, at this time, the direction of the plate deformation is generally not considered. Stamping parts, metal processing with the most, is at room temperature, steel/non-ferrous metal material by mold, provided by the press processing required for a given pressure forming shape. Metal stamping parts are widely used in every aspect of our lives, including electronics, auto parts, decorative materials, and so on. Stamping parts processing, including blanking, bending, deep drawing, forming and finishing process. Stamping parts processing materials is mainly hot rolled or cold rolled ( Mainly cold-rolled) Metal materials, such as carbon steel, alloy steel, spring steel, tinplate, galvanized sheet, stainless steel plate, copper and copper alloy plate, aluminum and aluminum alloy plate, etc. Metal stamping parts of hardness test using rockwell hardness tester. Small, stamping parts with complex shape, can be used to test the plane is small, can't test on ordinary desktop rockwell hardness tester. Dongguan hardware stamping parts are widely used in every aspect of our lives, including electronics, auto parts, decorative materials and so on. We usually say that the stamping is generally refers to the cold stamping parts, for example, a piece of iron plate, want to turn it into a fast food dish, then have to design a set of mold, the mold of the working face is the shape of the plate, with the iron mould pressure, they became plate you want, this is the cold stamping, is directly used mold for stamping metal materials. Almost all of the mechanical electronic products and so on of the above is useful to the stamping parts. A: press the key in the mold