What are the details of the stamping process

Stamping process is a kind of metal processing method, which is based on the plastic deformation of metal, used to pressure on the sheet metal mold and stamping equipment, sheet to produce the plastic deformation or separation, which has a certain shape, size and performance parts ( Stamping parts) 。 As long as to ensure the stamping process should pay attention to every detail to do, to perform processing more efficiency. To improve efficiency at the same time also can ensure that the finished product control. The details of the stamping process is as follows: 1. Must have before stamping plate straightening process steps or automatic correction tools, ensure raw material level off smoothly into the cavity. 2. Strip needs to clearly define in the clip on the feeding position, on both sides of the strip and feed clamp on both sides of the width of the gap needs to clearly define and ensure implementation. 3. Stamping debris will be timely and effectively remove without mixing or stick on the product. 4. Coil width on the material needs 100% monitoring, prevent the raw material is not full of stamping products. 5. Coil end whether to be monitored, in volumes expected first, stamping process will automatically stop. 6. Wi to define when appear abnormal downtime, the reaction product in mold. 7. When the strip into the mold before must have mistake proofing tools to ensure that the correct raw material to mold the internal position. 8. Continuous mode or feed mode requires every position monitoring, if the position has not gone to timely report to the police or automatic stop. 9. Stamping die must be equipped with a detector to detect whether there is a product card in the cavity, if you have stuck, automatic stop device. 10. Stamping process parameters are monitored, when appear abnormal parameters, automatic scrap in the production of products under this parameter. 11. The management of the stamping die whether effective implementation ( Preventive maintenance plan and implementation, check to confirm spare parts) 12. Used to blow away the debris of blowing air gun must clearly define the position and direction. 13. Finished product collection process can't there is the risk of damage to the product.