What should I pay attention to when purchasing and producing stamping brackets?

In the stamping production, it is necessary to ensure that the progressive die of all parts is fixed. Note that when the stamping bracket is produced, do not change the installation position of the progressive die. Once it is changed, the surface will be scratched or crushed, which will have a great impact on the quality of the workpiece. . Another point of view is that we have prepared materials that must meet technical specifications, pay attention to the measured dimensions of raw materials, and must conduct strict raw material inspections. In the production of stamping brackets, abrasive tools, and some punching and regular inspections must be performed to prevent long-term operation and wear of working parts and parts. Strictly follow the relevant precautions for the production of various stamping brackets to avoid unnecessary losses. 1. Precautions for purchasing stamping brackets (1) When buying stamping brackets, you can first observe whether there are any abnormalities in the appearance of the stamping brackets, or lack of implicit products. If so, do not buy them. (2) Using the petroleum test method, you need to wipe the surface of the stamping bracket first, then use a clean brush to smear the stamping surface in one direction, and then press it underneath and test with light, you can easily find the pitting of the stamping surface , On behalf of the ripple phenomenon. (3) If you have gauze on your body, you can clean the gauze to cover the surface treatment of the stamping bracket, the friction gauze stamping bracket on the surface, and the polished surface. If there are pitting on the surface, indentation, etc., you can customize it without buying. Flat pads and stamping parts. , Dongguan Hardware, a hardware stamping parts manufacturer with 15 years of experience, complete equipment, one-stop service, with a daily output of 30 million stamping cycles, is an ideal choice for your hardware stamping parts manufacturer, if you need to know more, welcome to consult the company website: