5 points to pay attention to in the production of stamping parts

Stamping factories have many things to pay attention to during the production of stamping parts. Stamping parts manufacturers need to be aware of these problems in advance, so that they can prevent them before they happen and deal with them in time when problems occur. Precision-Committed to the custom processing of precision stamping parts for more than 10 years, today, I will share with you 6 points that need to be paid attention to in the production of stamping parts. 1. The precision stamping parts should be strictly inspected before use to clean the stains. The guiding sleeves and molds of the stamping parts should be carefully checked for good lubrication. 2. In order to better ensure the service life of the stamping parts, the spring yellow of the mold should be replaced regularly to avoid the fatigue of the spring yellow affecting the application of the stamping parts. 3. When installing the mold, the stamping staff should use special tools for the actual operation of soft metal products to avoid damage to the stamping parts during the installation process. 4. When the die seat and cavity knife edge of the stamping parts are damaged, stop immediately, and immediately grind it, otherwise it will quickly expand the damage level of the die knife edge, accelerate the damage of the mold, and reduce the quality of the stamping part and the service life of the mold. 5. According to the installation procedure of the mold, install the concave and convex molds on the turntable to ensure that the orientation of the concave and convex stamping parts is consistent, especially the stamping parts with clear regulations should be installed carefully to avoid installation errors. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automobile stamping parts molds Learn more: Points to note in the design of continuous stamping dies (2)