6 precautions for precision metal stamping

Precision is a manufacturer of precision metal stamping and metal insert injection molding. The core technical team has focused on precision metal stamping and metal insert injection molding for more than 30 years. We promote 5S site management, TPM equipment management and pass the IATF16949 quality system certification. So today, our precision engineers will share with you the 6 precautions for precision metal stamping processing: 1. Before mechanical work, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and empty the machine tool. Run for 1-3 minutes, and it is strictly prohibited to operate when the machine is faulty. 2. Maintain the correct posture at work and have sufficient energy to cope with the work. If you find that you are unwell, you should leave the job immediately and report to the leader. It is necessary to concentrate your thoughts during operation, chat and cooperate with each other. The operator should not operate in a state of irritability and fatigue to avoid accidents and ensure that there is no problem with the operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Wearing slippers, high-heeled shoes and other clothing is not allowed, and those with long hair must wear protective caps. 3. When changing the mold, first turn off the power supply, and then start to install and debug the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand to test punch twice to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position. 4. It is necessary to wait for all other personnel to leave the working area of u200bu200bthe machine and remove the sundries on the workbench before starting the power supply to start the machine. 5. When the machine is working, it is forbidden to reach into the working area of u200bu200bthe slide block, and it is strictly forbidden to pick and place the workpiece by hand. Use standard tools when picking and placing the workpiece in the die. If you find any abnormal sound or malfunction of the machine, you should immediately turn off the power switch for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or step on the foot switch board, let alone put their hands in the working area of u200bu200bthe machine or touch the moving parts of the machine with their hands. 6. When leaving get off work, turn off the power and arrange the finished products, side materials and sundries on the post to ensure that the working environment is clean and free from accidents. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automobile stamping parts molds Learn more: Points to note in the design of continuous stamping dies (2)