One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
98% of people want to know the process of metal stamping parts-hardware
98% of people want to know the hardware stamping process requires the hardware to tell you the so-called hardware stamping process is the difficulty of processing this metal stamping part. Perfect manufacturability should ensure high raw material usage rate, few processing procedures, simple structure of stamping die and long service life, high quality of stamping parts, and simple and convenient operation of stamping workers. There are many factors that affect the manufacturability of metal stamping parts, such as the product shape, size, accuracy and performance of metal stamping parts. The following is a proposal for the stamping author to analyze some factors that affect the manufacturability of metal stamping parts. 1. The shape of the metal stamping parts should be simple and symmetrical, preferably composed of arcs and straight lines, so that waste can be generated when designing the layout. a bit less. 2. Try to avoid long cantilevers or slots on metal stamping parts, and the minimum width should be greater than twice the material thickness. The distance between the hole and the hole, the hole and the edge of the metal stamping parts should not be too small. 3. The size of the punching hole should not be too small, so as not to break the punching needle during the punching process. 4. Under normal circumstances, the shape of the metal stamping parts should not have sharp corners, but should adopt rounded corner transition, which is conducive to the processing of the stamping die and improves the service life of the die. 5. When punching holes on punching and bending parts and punching and drawing parts, the distance between the edge of the hole and the straight wall of the workpiece cannot be too small. If the distance is too small, the hole will be deformed after punching and forming. After punching, the punching needle will easily break. Need to know more, welcome to consult:, the hardware is well-equipped, the senior team, hand it to, it is to be relieved