A brief overview of the precautions for stamping parts

The definition, characteristics, and planning criteria of stamping parts have been mentioned in the previous article, so we have some basic knowledge and understanding in this field, but this is just the beginning. If you want If we have a comprehensive understanding, then we still have a long way to go, and there is still a lot of common sense waiting for us to explore and learn, so there can be no slack, we should study and grasp carefully. Below, the author will briefly introduce what are the precautions for stamping parts, so that we can clearly understand, learn and grasp, the specific content is as follows. 1. When performing successive stamping, do not take the product by hand to prevent risks. 2. When feeding, the operator can only be outside the machine, and there must be a certain distance from the machine to ensure safety. 3. When adjusting the machine, only one person can operate it, not two people together. 4. After using the item, put it back into the item box and not put it on the machine to prevent it from slipping and hurting people. 5. When using the equipment department, the power supply should be blocked to prevent it from being started. 6. When producing short and small workpieces, special tools should be used. The operator cannot directly feed or pick up the parts by hand to avoid accidents or risks. 7. The operator should wear protective equipment before operating the machine. 8. The machinery and equipment must be clean and tidy, free of dirt, dust, etc. 9. The repair of machinery and equipment should be carried out by professional and technical personnel, and other personnel cannot carry out repairs privately. 10. Do not accumulate flammable and explosive materials under the switch. 11. Stamping operations should be carried out strictly in accordance with the requirements of the rules, and illegal operations are prohibited. 12. After finishing the operation, clean up the machine and work place, wipe the work surface, and put things back in place. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections