A brief talk on the comparison of stamping processing and mechanical processing in stamping parts processing plants

Stamping parts are processed by a punching machine. Compared with the methods of mechanical processing and plastic processing, stamping processing has many unique advantages in both technical and economic aspects. Let’s take a look at it below; 1. The production of stamping processing High efficiency and convenient operation, easy to realize mechanization and automation. This is because stamping relies on punching dies and stamping equipment to complete the processing. The number of strokes of an ordinary press is dozens of times per minute, while high-speed pressure needs to be hundreds or even more than a thousand times per minute. 2. The stamping is guaranteed by the mold during stamping. The size and shape accuracy of the parts generally do not damage the surface quality of the stamping parts, and the life of the mold is generally longer, so the quality of the stamping is stable, the interchangeability is good, and it has the characteristics of'identity.' 3. Stamping can process parts with a large size range and more complex shapes, such as stopwatches as small as clocks and clocks, as large as automobile longitudinal beams, covering parts, etc., plus the cold deformation and hardening effect of the material during stamping, and the strength and rigidity of the stamping Both are higher. 4. Stamping generally does not generate chips and scraps, consumes less materials, and does not require other heating equipment, so it is a material-saving and energy-saving processing method. Relatively speaking, the cost is relatively low. Article recommendation: A brief introduction to the servo press used in stamping parts processing Previous: What is the situation of defects on the outer surface of stamping parts?