Advantage analysis of stamping parts production process

In the current market, people are no longer unfamiliar with stamping parts, because many stamping products are used in our lives. However, some of my friends still don't know much about the processing process of stamping products. Below we will share some knowledge about this for you, hoping to help you. First of all, let's understand the principle of stamping production. In the process of stamping, metal or non-metal materials are deformed under the action of external force. As the force increases, plastic deformation will occur when the yield limit of the material is exceeded. If the pressure continues to increase, the vortex air pump will exceed the ultimate strength of the material, and the material will fracture and separate. Therefore, in the actual stamping process, what we call stamping parts actually use this idea to separate or deform the material at room temperature, so as to obtain the required shape and required parts. Compared with other production methods, this production method has many advantages. First of all, under the action of the punch, we can get parts with different shapes and even more complicated parts. The stamping products of different shapes obtained by this method are not only dimensionally stable, but also have high precision, and at the same time have good interchangeability. In addition, under the condition of little material loss, parts with lighter weight, good strength, good rigidity, and smooth and beautiful appearance can be obtained. It is understood that the use of this method can make the utilization rate of materials reach 75% to 85%. More importantly, in the processing of stamping parts, the entire production process is not only very smooth, but also greatly reduces labor intensity. In the case of mass production, the production cost of stamping parts can be effectively reduced. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections