Advantages of stamping drawing oil

Stamping drawing oil is a kind of metal processing oil, which can be used in drawing forming, stamping forming and other processing processes. Stamping drawing oil is divided into: water-soluble drawing drawing, metal drawing drawing oil, stainless steel drawing drawing oil. Stamping drawing oil is very important for stamping drawing processing, we need to understand it. Precision-Committed to precision stamping and drawing for more than 10 years, I will introduce the advantages of stamping and drawing oil. 1. The slipperiness of the drawing oil: This is an important function of the drawing oil. If the slip is not good, it will cause splitting of the workpiece, sintering of the plate and metal, scratches on the product, severe mold wear, and reduced mold life. 2. The rust resistance of stamping drawing oil: the parts after stamping processing need the drawing oil to have excellent rust resistance. Since the greasy oil used for stamping is highly adsorbable, it adheres to a hard-to-damage oil film on the metal surface, so it has an anti-rust effect if it is unusual. But the size of the effect is based on the nature of the grease and the processing conditions that are not abnormal and not abnormal, and the others are also based on the non-abnormality and non-abnormality of the parts abandonment environment. Therefore, the environment is stubborn and the storage time is permanent, and the oil is rust-proof. Pray for higher. 3. The weldability of stamping drawing oil with oil: In order to simplify the process and increase the production power, the drawing oil is requested to have the effect of welding with oil without washing. Occasionally, due to adhesion of tensile oil, rust occurs in the welding area. Some oil generates harmful gas during welding and affects welding strength. The above achievements do not occur when welding with oil after stamping, which is extremely stressful for drawing oil. 4. The degreasing property of the stamping drawing oil: when the drawing oil is attached to the stamping parts, the washing agent and the washing method that can be washed can be used to finish the washing process, the washing cost is low, and it takes a very short time It can be degreasing, which is also one of the tension characteristics. The stamping parts are not clean, which will affect the painting and electroplating of the subsequent process. 5. The controllability of the drawing oil: the time and labor required to apply drawing oil to the processed plate before punching is detrimental to the production power, so the simple end of this control will also become the drawing oil. A nature of pleading. Especially for large standard parts, this property is extremely tight. If you look at the controllability, you should even choose a low-viscosity drawing oil. [Related recommendation] Learn more: 精の corporate culture Learn more: Continuous improvement and innovation are the key factors for the survival of stamping companies Learn more: The development of the metal stamping processing industry