Aluminum alloy stamping, understand these your products are more qualified

Aluminum alloy stamping, because its material is different from other metal materials, the stamping factory should do a good job of redesigning and molding based on the material before production, so that the product will be more beautiful and more qualified after stamping. Because the hardness of aluminum is soft and the mold is easy to block, when designing the mold gap, the size should be kept at a gap of 10% of the thickness of the bilateral material. The depth of the knife edge should be 2mm, and the taper should be 0.8mm to 1mm. Between degrees. In the case of not affecting the number of processes, the punching process should be ranked as far as possible, and even for a mold with a large number of punching, it is better to add one more process, and the punching process should be ranked last. 15 years of dedicated experience in hardware and aluminum alloy stamping parts, custom processing and production of 20,000+ sets of molds, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 quality inspection layers Strictly check the quality. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve mass production quality problems.