Aluminum stamping parts processing, this knowledge allows you to easily post-processing []

Most of the aluminum stamping parts are processed with later surface treatment processes for stamping parts. Do you know which processes are available? What details should be paid attention to in production? Xiaoshuo will take you to understand: 1. For some stamping parts that need anode processing in the later period, the flattening and flattening process cannot fully press the product, otherwise there will be acid spitting in the anode, and a 0.2-0.3mm diameter should be left. Seam, so that the acid can flow out smoothly. Therefore, this process needs to make a limit block and calibrate the mold height on the mold concealed tool. 2. As the aluminum alloy material is soft and easy to crack, especially in the case of reflexed edges, do not make crimping as much as possible. Even if it is to be done, the crimping should be made wider and the depth of the crimping should be shallower. 3. The processing of aluminum stamping parts should use slow-moving wire processing as far as possible to prevent burrs and irregular blanking. Aluminum parts are prone to high temperatures during production, so the mold needs to choose better materials. Hardware, 15 years of ingenuity focused on aluminum stamping parts processing, 20,000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, 3 million punching times per day, stamping accuracy up to 0.01mm, and 16 quality inspections strictly. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!