Analysis of common failure causes in the production process of stamping parts

Stamping is a kind of metal product that is widely used in life. Its role is very important and it is indispensable for many industries. When stamping parts are processed by stamping processing plants, some faults will occur, which will affect production efficiency and increase production costs. Below, we will introduce the common causes of failures in the production process of stamping parts. 1. Risks caused by the structure of the punch press. At present, most of the punch presses still use a rigid clutch. Once the clutch is connected and operating, a stamping cycle system is required before the slide rail slides to stop running. If during the stamping process, the stamping staff's hands cannot be taken out of the mold immediately, a stamping injury accident will occur. 2. Common faults in the entire stamping process. The punching machine will cause shock and vibration during operation. Over time, the parts of the high-speed punching machine will be deformed, worn out and cracked, which will cause the punching machine to be out of control and cause continuous punching. It is a very risky situation. 3. Common faults of the power switch of the punch press The power switch of the punch press has common faults due to human factors or long-term lack of maintenance, resulting in failure in the stamping process. 4. The design of stamping die is unscientific. Stamping die is the basis for the production of stamping parts. The design of stamping die is unscientific, which will greatly increase the probability of stamping accidents. All normal stamping dies will also be worn, deformed or destroyed along with the increase in use time, which will cause operation accidents. [Recommendation] Learn more: The type of electroplating process for stamping parts Learn more: How to obtain the position accuracy of stamping parts in a stamping processing order Learn more: Surface treatment of aluminum stamping parts