Analysis of Process Production Characteristics of Stamping Parts

Compared with other types of workpieces such as castings and forgings, stamping products have the characteristics of thinness, uniformity, lightness and strength. At the same time, the stamping products produced by the stamping process also have workpieces with reinforcing ribs, ribs, undulations or flanges that are easier to obtain than other methods to improve their rigidity. At the same time, with the improvement of the stamping process, not only the entire process flow is more and more perfect, but also the molds and processing tools used have high precision, high repeatability and consistent specifications. The spheroidizing agent can punch out holes, Boss and so on. For example, cold stamping parts are usually no longer processed, or only a small amount of cutting processing is required. In this way, it is equivalent to greatly improving production efficiency. It can be seen that, in fact, the use of stamping technology to process and produce various types of stamping products is a very efficient production method. Generally, in the process of stamping, composite dies are used, especially multi-station progressive dies, which can complete multiple stamping processes on one press, and realize the process from strip uncoiling, leveling, punching to forming and finishing. Fully automated production. The production efficiency is high, the working conditions are good, and the production cost is low. Generally, hundreds of pieces can be produced per minute. In the stamping process, according to its specific process type, it can be divided into two categories: separation process and forming process. The separation process is also called punching, and its purpose is to separate the stamping part from the sheet along a certain contour line while ensuring the quality requirements of the separated section. The surface and internal properties of the stamping sheet material have a great influence on the quality of the stamped product, and the thickness of the stamping material is required to be accurate and uniform. Under normal circumstances, the surface of the produced product should be kept smooth and flat without any defects. It can be understood from the above introduction that, in fact, in modern industry, the stamping process has become a widely used production method. The stamping products produced by the stamping process have exerted excellent performance in many aspects and played a good role. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections