Analysis of some common problems in the manufacturing and processing of stamping parts [hardware]

In the manufacture of stamping parts, during the production process, some production problems are often caused due to raw materials, molds, and machines. Xiaoshuo sorts out a few points, and analyzes some common problems in the process with you: 1. Adhesion, scratches: defects that appear on the surface of the part or mold due to the friction between the material and the punch or die; 2. Burr: Mainly occurs in the cutting die and the blanking die, the gap between the cutting edges may be large or small, which will produce burrs; 3. Line offset: When the part is formed, the part that first contacts the die is squeezed and a line is formed 4, Concave and concave: foreign matter (iron filings, rubber, dust) mixed in the uncoiling line causes convex and concave; 5, zigzag: due to uneven stress, poor drawbead matching or poor press slider control, etc., the part r corner or The embossing parts are twisted and strained; hardware, 15 years of ingenuity and focus on stamping parts manufacturing, 20,000+ sets of customized mold production experience, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punches, and stamping accuracy up to 0.01mm, 16 The quality inspection is strictly controlled at all levels. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!