Analysis of the causes of poor riveting in the riveting manufacturing of stamping parts manufacturers and treatment methods-hardware

According to the different use of customers' products, sometimes two or several kinds of stamping parts need to be riveted together by the stamping part manufacturer. In this case, a single stamping part is generally produced by stamping first, and then two or more stamping parts are riveted together by metal lamination, flanging, interlocking, etc. through the riveting die. What are the reasons for bad riveting? How should we deal with it? (1) Improper mold closing height and riveting inadequate adjustment of the closing height (2) The workpiece is not in place, and the positioning deviation is adjusted. (3) The workpiece is defective before riveting. Confirm the sprout hole. Chamfer, if there is no chamfer, increase the chamfer. (4) The length of the riveting punch is not enough and replace it with a punch of appropriate length. (5) The riveting punch does not meet the requirements. Confirm and use the riveting punch hardware that meets the requirements. Customized stamping parts manufacturer for your complex stamping parts. The factory has an area of u200bu200b5,000 square meters, monthly processing capacity of 100+ sets of molds, and a daily production capacity of 3 million. It can quickly solve the time problem, precision problem and quality problem of your customized stamping parts. Choose, choose to rest assured!