Baoan metal stamping parts processing plant, production precautions + 16 strict quality inspection checks

Regarding the production precautions of stamping processing, the production staff of Baoan hardware stamping parts processing plant mentioned some relevant knowledge. The following Xiaoshuo will take everyone to understand: 1. Semi-automatic and manual punching machines must first install the two-hand brake switch. It is strictly forbidden to pedal or start the switch with one hand. 2. After the high-stroke machine is adjusted, and after normal stamping, close the soundproof box (except for the 8065 side inspection side packaging of the product). 3. During continuous punching, employees cannot take the product by hand within 1M of the punching machine. 4. When the technician is on the mold and adjust the machine, only one person can debug, not two people to debug. 5. The technician can adjust the machine and feed the material, only outside the machine, and the distance is not less than 1M. 6. Be sure to tighten the screws when setting up the mold, and stop the machine for 4 hours to check whether the screws are loose. 7. When there is a problem in the production process of the mold, there is no need to remove the mold. When the mold is directly repaired on the machine tool, the power supply of the injection molding machine must be turned off and the repairing sign can be hung on the power box before the mold repair can be implemented. 8. All tools are returned to the tool box after use, and cannot be placed on the machine table to prevent the tools from slipping and hurting people. Hardware, 15 years of ingenuity focused on metal stamping parts processing, 20000+ sets of stamping die customized production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and stamping accuracy up to 0.01mm , The raw materials are imported and national standard original factories, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!