Baoding metal stamping parts, what are the common problems of stamping processing + 3 million punching next day production capacity

The hardware responsible for manufacturing Baoding hardware stamping parts said that some common problems in stamping processing often trouble stamping manufacturers. Xiaoshuo sorted out some related materials according to actual production, and let's take a look at it together: 1. Adhesion, scratches: defects on the surface of the part or mold due to the friction between the material and the punch or die; 2. Burr: mainly occurs in the cutting die and blanking die, the gap between the cutting edges may be large or small, and burrs will be produced; 3. Line offset: When the part is formed, the part that first contacts the mold is squeezed and formed One line; 4. Convex and concave: foreign matter (iron filings, rubber, dust) mixed in the uncoiling line causes convex and concave; 5. Torturous: due to uneven stress, poor drawbead matching or poor control of the press slider, etc., the part r angle Wrinkles and strains occur in the parts or embossed parts; 6. Wrinkles: Wrinkles on the edges or r parts are caused by poor adjustment of the press slider, low press accuracy, improper adjustment of the air cushion pressure, large punch or r parts. Hardware, 15 years of focusing on Baoding hardware stamping parts, 5000 square meters production workshop, hundreds of precision processing production equipment, more than 20 Ru0026D and design engineers, monthly processing capacity of 100+ sets of molds and daily production capacity of 3 million punching times, and the stamping accuracy can reach 0.01mm, 16 quality inspection layers are strictly controlled. It can quickly solve the urgent problem of time when choosing hardware stamping processing, solve the problem of stamping accuracy, and solve the problem of production quality. Over the past 15 years, I have been conscientious and dedicated, only for the result of your needs, the result of the work!