Basic introduction of stainless steel stampings

Stainless steel stamping parts and castings, forgings, compared with a thin, uniform, the characteristics of light and strong. Stamping can make other methods are difficult to manufacture with rib stiffener, flanging, ups and downs, or artifacts, in order to improve its stiffness. Because use precision mould, workpiece precision can reach micron grade, and repeat precision is high, the specification is consistent, can punch a hole nest, convex sets, etc. Cold stamping stainless steel stamping machines generally no longer by machining, or only need a small amount of machining. Hot stamping precision and surface state is lower than the cold stamping parts, but it's still better than the castings, forgings, cutting processing capacity. Stainless steel stamping is efficient production methods, the use of compound die, especially the multi-station progressive die, it can be finished in a pressure on multichannel stamping process, realize the pick-up uncoiling, leveling, cutting to the forming and finishing of automatic production. High production efficiency, good working conditions, low production cost, general can produce hundreds of pieces per minute. Stainless steel stamping mainly are classified according to the process, can be divided into separation process and forming process two kinds big. Separation process is also called the blanking, and its purpose is to make from the sheet metal stamping parts along the contour line must be separated, and at the same time guarantee the quality requirements of the separation section. Stamping with sheet metal surface and internal performance of stamping has great influence on the quality of the finished product, request stamping material thickness precision, uniform; Smooth surface, no spots, no scar, no scratch, no surface crack, etc. ; Yield strength evenly, no obvious directivity; High uniform elongation; Showed low; Low strain hardening. A: the advantages of aluminum alloy stampings