Bazhou Kangxianzhuang Hardware Stamping Factory, hardness testing +16 strict quality inspections

The technicians of Bazhou Kangxianzhuang Hardware Stamping Parts Factory have introduced the hardness testing of metal stamping parts. Xiaoshuo has compiled some information, and I will analyze it below for everyone: The hardness testing of metal stamping parts adopts Rockwell hardness tester. Small stamping parts with complex shapes can be used to test the surface is very small, can not be tested on the ordinary desktop Rockwell hardness tester. The PHP series portable surface Rockwell hardness tester is very suitable for testing the hardness of these stamping parts. Alloy stamping parts are commonly used parts in the field of metal processing and mechanical manufacturing. Stamping processing is a processing method that uses molds to separate or shape metal strips. Its application range is very broad. The main purpose of the hardness test of stamping parts is to determine whether the annealing degree of the purchased metal sheets is suitable for the subsequent stamping parts processing. Different types of stamping parts processing techniques require plates of different hardness levels. The aluminum alloy plate used for stamping parts can be tested with a Webster hardness tester. When the thickness of the material is greater than 13mm, it can be changed to a Barcol hardness tester. The pure aluminum plate or low hardness aluminum alloy plate should use the Barcol hardness tester. Hardware, 15 years of craftsmanship focusing on metal stamping parts, 20,000+ sets of customized mold production experience, monthly processing capacity of 100+ sets of molds, and daily production capacity of 3 million punching times. The stamping accuracy can reach 0.01mm, and 16 quality inspections are strictly controlled. It can quickly solve the time-critical problem of flat washers, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose to rest assured!