Beijing Daxing metal stamping parts, what is the reason for the waste during stamping + 3 million stamping next day production capacity

Beijing Daxing hardware stamping parts processing custom manufacturer, said, what is the reason for the stamping waste produced during stamping? The following hardware Xiaoshuo will analyze the causes and solutions according to the specific practical situation: 　　1) Reason: 　　The quality of the raw materials is poor; the die is installed and adjusted improperly; the operator does not feed the strip correctly along the positioning Or there is no guarantee that the strips are fed according to a certain gap; due to long-term use, the gap changes or the working parts and guide parts of the die are worn out; due to the impact and vibration for too long, the loosening of the fastening parts causes the relative changes in the installation positions of the die; operation The negligence of the author and failure to follow the operating procedures. 2) Countermeasures: 　　The raw materials must conform to the specified technical conditions (strictly check the specifications and grades of the raw materials, and conduct laboratory inspections on the workpieces with high dimensional accuracy and surface quality requirements under conditions.); as specified in the process regulations All aspects of the process should be strictly observed; the presses and die and other tooling equipment used should be guaranteed to work under normal working conditions; a strict inspection system must be established during the production process, and the first stamping parts must be all aspects Inspection, production can only be put into production after the inspection is qualified, and at the same time, the inspection should be strengthened, and the accident should be dealt with in time;> The cutting-edge numerical control technology WeChat is good, remember to pay attention. Adhere to a civilized production system, such as the transfer of workpieces and blanks, must use appropriate workstations, otherwise the surface of the workpiece will be crushed and scratched, which will affect the surface quality of the workpiece; ensure that the mold cavity is clean and work during the stamping process. Workpieces that need to be organized and processed in an orderly manner should be placed neatly. Hardware, 15 years of focusing on Beijing Daxing hardware stamping parts, 20,000+ sets of customized stamping die production experience, monthly processing capacity of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and silk-like stamping accuracy 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!