Botou metal stamping parts processing plant, separation process + 15 years stamping experience team

The separation process refers to the process of separating the stamping parts and the sheet material along a certain contour line during the stamping process. The technicians of the Botou hardware stamping parts processing plant have introduced the name and characteristics of the separation process, and Xiaoshuo has compiled some information , Let’s take a look at it below: Blanking: Use a die to punch the sheet along the closed line, and the part that is punched is the workpiece. Punching: Use a die to punch the sheet along the closed line, and the punched part is waste. Cutting: Use scissors or a mold to cut the sheet, the cutting line is not closed. Trimming: Use a die to punch out the excess material on the edge of the workpiece. Punching: punching out narrow and long grooves on a sheet or formed part. Cutting: Cut the semi-finished product processed by stamping into two or several parts, etc. Dongguan Hardware Co., Ltd., 15 years of experience in stamping parts production, top 500 corporate partners, more than 20 mold Ru0026D and design engineers, 5,000 square meters workshop, hundreds of precision processing and production equipment, 3 million punching next-day production capacity, 20,000+ sets of stamping Customized mold production experience, the precision of stamping parts can reach 0.01mm. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!