Cangzhou Botou metal stamping parts production, production considerations +.16 strict quality inspections

Stamping production is a highly dangerous industry. The technicians of Cangzhou Botou metal stamping parts production have summarized some points for attention in stamping production. Xiaoshuo collected some information, and let everyone know: 1. Semi-automatic and manual The punch must be equipped with a two-hand brake switch, and it is strictly forbidden to press with a pedal or one-hand start switch. 2. After the high-speed punching machine is finished, and after normal stamping, close the soundproof box (except for the 8065 side inspection side packaging of the product). 3. During continuous punching, employees cannot take the product with their hands within 1M of the punching machine. 4. When the technician is on the mold and adjust the machine, only one person can debug, not two people. 5. The technician can adjust the machine and feed the material, only outside the machine, and the distance is not less than 1M. 6. Be sure to tighten the screws when setting up the mold, and stop the machine for 4 hours to check if the screws are loose. 7. All the tools are returned to the tool box after use, and can not be placed on the machine table, so as to prevent the tools from slipping and hurting people. Dongguan Hardware Co., Ltd., 15 years of experience in stamping parts production, top 500 corporate partners, more than 20 mold Ru0026D and design engineers, 5,000 square meters workshop, hundreds of precision processing and production equipment, 3 million punching next-day production capacity, 20,000+ sets of stamping Customized mold production experience, the precision of stamping parts can reach 0.01mm. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!