Cangzhou hardware stamping parts manufacturers, how to process non-ferrous metals

How to process non-ferrous metals has always been a problem encountered by most of the general metal stamping manufacturers. So what are the processing methods of Cangzhou metal stamping parts manufacturers [hardware] for non-ferrous metals? Non-ferrous alloys are based on a non-ferrous metal. (Usually greater than 50%), an alloy formed by adding one or more other elements. Non-ferrous metals generally refer to all metals except iron (and sometimes manganese and chromium) and iron-based alloys. Non-ferrous metals can be divided into heavy metals (such as copper, lead, zinc), light metals (such as aluminum, magnesium), precious metals (such as gold, silver, platinum) and rare metals (such as tungsten, molybdenum, germanium, lithium, lanthanum, and uranium). Stamping is a method of metal cold deformation processing. Therefore, it is called cold stamping or sheet stamping, or stamping for short. It is one of the main methods of metal plastic processing (or pressure processing), and it also belongs to material forming engineering technology. Hardware processing methods (1) The stamping processing has high production efficiency, and is easy to operate, and it is easy to realize mechanization and automation. This is because stamping relies on punching dies and stamping equipment to complete the processing. The number of strokes of ordinary presses can reach dozens of times per minute, and the high-speed pressure can reach hundreds or even thousands of times per minute. May get a stamped part. (2) When stamping, since the mold guarantees the size and shape accuracy of the stamping parts, and generally does not damage the surface quality of the stamping parts, and the life of the mold is generally longer, the quality of the stamping is stable, the interchangeability is good, and it is 'identical' Characteristics. (3) Stamping can process parts with a large size range and more complex shapes, such as stopwatches as small as clocks and clocks, as large as automobile longitudinal beams, covering parts, etc., plus the cold deformation and hardening effect of the material during the stamping, and the strength and strength of the stamping The rigidity is relatively high. (4) Stamping generally does not generate chips and scraps, consumes less material, and does not require other heating equipment, so it is a material-saving and energy-saving processing method, and the cost of stamping parts is lower. Cangzhou metal stamping parts manufacturer has focused on precision metal stamping for 15 years, and the stamping precision reaches ±(positive/negative) 0.01mm, 95% of the general counterparts in supermarkets. If you have stamping needs, the hardware looks forward to your call: