Cangzhou metal stamping parts factory, how to ensure the quality of stamping parts + 16 strict quality inspections

The production staff of Cangzhou Metal Stamping Parts Factory talked about how to guarantee the quality of stamping parts and drawing parts. The following Xiaoshuo introduces to you several basic methods, which can be effectively used for quality inspection of stamping parts and stretched parts: 1. Contact inspection Use clean gauze to wipe the surface of the outer cover clean. The inspector needs to wear contact gloves to make contact with the outer surface of the stamping part along the longitudinal direction of the stamping part. This inspection method depends on the inspector's experience. Whetstone can be used to polish the detected suspicious area and verify it. This method is a quick inspection method. 2. Oiling inspection Use clean gauze to wipe the surface of the outer cover clean. Then use a clean brush to apply oil evenly to the entire outer surface of the stamping in the same direction. Put the oiled stamping parts under strong light for inspection. It is recommended that the stamping parts be erected on the car body. With this method, you can easily find small pits, pits, and ripples on the stamping parts. 3. Visual inspection Visual inspection is mainly used to find abnormal appearance and macro defects of stamping parts. 4. Checking tool testing Put the stamping parts into the checking tool, and inspect the stamping parts according to the operating requirements of the checking tool manual. , Focusing on Cangzhou Metal Stamping Parts Factory for 15 years, monthly processing and assembly capacity of 100+ sets of molds. There is quantity, accuracy, and efficiency. The next-day production capacity of 3 million punches, 16 strict quality inspections, and the stamping accuracy can reach 0.01mm, which can quickly solve the time emergency problem of stamping parts processing, solve the stamping accuracy problem, and solve the production quality problem. Choose, choose to rest assured!