Causes and preventive measures of scraps in stamping parts

In modern production, there are often many problems in the processing of stamping parts. Among them, the most undesirable problem for producers is stamping waste. Therefore, we usually take corresponding measures to reduce the occurrence of this situation. So, in order to help everyone better solve this problem, we will give specific reasons and preventive measures. First of all, for this situation, we have analyzed the specific reasons, and now share the main reasons with you. The main contents include: 1. The quality of the raw materials used in the stamping parts is poor; 2. The installation and adjustment of the die is unreasonable; 3. The staff does not feed the material along the positioning, or does not guarantee that the strip is fed according to a certain gap; 4. Long-term use of the die will cause the gap to change or the working parts and guiding parts of the die will be severely worn; 5. The die has been exposed to shock and vibration for too long, causing the fastening parts to loosen. In addition, there is another important reason that cannot be ignored. That is, in the production of stamping parts, because the staff did not operate according to the requirements of the operating regulations, resulting in stamping waste, resulting in waste. So, the cause of the problem has been clarified, and then we need to take corresponding measures to deal with it. First of all, during the production of stamping parts, it is necessary to ensure that the quality of the selected raw materials meet the production requirements, strictly control the quality of the raw materials, and strictly inspect them in accordance with the requirements; secondly, the various links specified in the process regulations should be comprehensive Compliance; then, during the production period, be sure to ensure that all production equipment is normal and free from bad conditions. In addition, in the production process, a set of feasible production management systems and inspection systems must be formulated, and the quality of stamping parts must be strictly inspected; the requirement for the staff is to take the work seriously and ensure that the operation is carried out in accordance with the requirements. So as not to affect the production quality of stamping parts. Related news: the characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspection, the advantages of metal stamping parts introduce the advantages, procedures and characteristics of stamping parts