Causes of mold jams in the processing of metal stamping parts and how to control them-hardware

98% of people want to know the causes of mold jams in the processing of metal stamping parts and how to control it. Hardware introduces you that molds are indispensable and important equipment for the processing of metal stamping parts. During the processing, if the stamping is bad, it is necessary Analyze the principles in time, put forward effective solutions, and deal with the problems well in order to avoid greater failures, reduce production costs, and ensure smooth production. In the process of metal stamping parts processing, mold jamming is a common problem. The following hardware authors will introduce the causes and solutions of mold jamming in the processing of metal stamping parts. The reasons are as follows: 1. Improper adjustment of the feeding distance, pressing and loosening of the feeder. Solution: recheck and adjust. 2. The delivery distance changes during production. Solution: readjust. 3. Die stamping is abnormal and sickle bend is caused. Solution: Eliminate the sickle bend of the material belt. 4. Insufficient hole diameter of guide material, upper die pulls material. Solution: Study the punching and guiding hole convex and concave molds. 5. The stripping function of the guide plate is set improperly, and the strip is attached. Solution: Modify the guide material and prevent the material from being attached to the belt. 6. Improper erection of the mold and large deviation from the verticality of the feeder. Solution: re-erect the mold. The above is about the reasons and solutions of mold jams in the processing of metal stamping parts. I hope to help everyone. If you need to know more details about metal stamping parts, please pick up your phone and call