Chamfered flat washers, what are the production requirements for flat washers + 17% improvement in production and assembly efficiency

The technical staff responsible for the hardware production of chamfered flat washers said that regarding the wiring flat washer, it seems a simple product. If the quality is not up to the standard, the flatness of the flat washer is uneven and the accuracy is not qualified It causes the problem of unbalance of the motor in work, and then causes the problem of loud noise in the work of the motor and reduced service life. The following Xiaoshuo will analyze with you: 1. Motor flat washers, generally choose metal raw materials that should not be too hard, so that the fixed part of the motor is stable during work. 2. The flatness of the flat washer needs to be flat. It can make the motor in operation, each fixed force point is also stable. 3. The accuracy of the flat washer will also affect the motor. It is necessary to control the burr of the flat washer within a certain range, and the overall flatness of the flat washer will not affect the jitter of the motor. Hardware, 15 years of focus on chamfered flat washers, 5000 square meters production workshop, hundreds of precision processing production equipment, stamping accuracy up to 0.01mm, 16 quality inspection layers are strictly controlled. The motor flat washer produced is made of imported or national standard raw materials, and the flatness can reach 0.02mm, so that it can be used with the motor to enhance stability and improve accuracy.